KAINE LIGHT-ON

2-in-1 Cleansing + Skincare Enhancement

• Designed for daily life, travel, business trips, or professional use.
• Helps improve skincare absorption by 81.85% compared with manual application.
• 96.46% improvement in pore impurity removal.
• Approximately KRW 271 per use based on estimated lifetime daily use.

• Product Name: KAINE Light-ON
• Distributor: KAINE INC.
• Manufacturer: AWORLD Co., Ltd.
• Country of Origin: Republic of Korea (Made in Korea)
• Rated Input: DC 5V / 1A (USB-C)
• Power Consumption: max. 2.03 W (3.7 V x 550 mA)
• Battery: 3.7 V / 800 mAh (Lithium Polymer)
• Charging Time: Approx. 3 hr 30 min
• Certification No.: R-R-KAIN-KAI-LightON
• Dimensions: 30mm (W) x 30mm (L) x 110mm (H)
• Weight: 73 g (78 g with cleansing head attached)

Good ingredients deserve better delivery

Light On Mode: Use for 3 minutes per session, morning and evening.

1. Pull the cap straight up to remove it, then press and hold the power button for 2 seconds (A white light indicates Standby Mode)

2. Press the button to activate Light-ON Mode, then choose one of three care modes based on your needs. Press the power button to cycle through 3 modes for your skincare needs. *Start at Level 1 and gradually increase the intensity as your skin adjusts

3. Apply your skincare product after cleansing, using a generous layer of toner, serum, or gel. We recommend pairing it with KAINE Hyaluronic Cooling Booster Gel. *Use with a hydrating skincare formula. Do not use on dry skin

4. Place the treatment head flat against the skin and glide it slowly to help distribute your skincare evenly. Glide from the center of your face outward in slow, upward strokes. Hold for 2–3 seconds on each area. Use light pressure around the eyes and on sensitive skin. For areas that need extra attention, switch to Radiance-ON Mode.

5. After each use, wipe the treatment head with a soft, dry cloth. Replace the protective cap before storing.

Healthy-looking skin starts with consistency

Cleansing Mode: Use for approximately 3 minutes per session. Recommended once in the morning and once in the evening as part of your cleansing routine.

1. ATTACH THE CLEANSING HEAD: The device automatically switches to Cleansing Mode when the head is attached (Twist the head into place until securely attached)

2. POWER ON & SELECT INTENSITY: Press and hold for 2 seconds. Press again to choose from 3 levels.

3. GLIDE IN GENTLE CIRCLES: Apply your cleanser to damp skin. Glide outward and upward in small circles.

4. RINSE & DRY: Rinse the cleansing head with water. Detach and allow it to air-dry completely.

• My device won’t turn on

The battery may be fully discharged. Fully charge the device before trying again.

• How often can I use LIGHT-ON?

LIGHT-ON may be used twice daily, morning and evening. Adjust usage based on your skin's condition.

• Can I use my own skincare product?

KAINE Hyaluronic Cooling Booster Gel is recommended. You may also use a hydrating toner, serum, ampoule, or essence. For best performance, avoid oil-based products.

• Is it normal to feel a slight tingling sensation?

A mild tingling sensation may occur while using LIGHT-ON Mode. This is a normal response. If you experience discomfort, reduce the intensity and ensure sufficient skincare product is applied.

• How do I clean the device?

The IPX7-rated design allows the attachment to be rinsed under running water. After cleaning, dry the device thoroughly with a soft cloth before storing.

*Always ensure the charging port is completely dry before connecting the charging cable.

• Can I use a fast-charging adapter?

We recommend using a standard 5V/1A USB adapter. Although the device is designed to work with fast-charging adapters, we recommend a standard charger for the most stable charging performance.